掀开奶罩边躁狠狠躁苏玥视频,无码专区3d动漫精品,去阳台跪着把屁股抬起来,精品国产丝袜黑色高跟鞋

Common grades of ferrosilicon and Effect of carbon on ferrosilicon

• Monday, September 30, 2019
• Source:ferro-alloys.com

•  Save  Print

  Font: Big Middle Small
• Share

• Keywords:Common grade, carbon, ferrosilicon

[Ferro-Alloys.com] 

 

Common grades of ferrosilicon

 

1. Ferrosilicon 75. Generally, silicon iron containing silicon 75. Low carbon, phosphorus and sulfur content,

 

2. Ferrosilicon 72. Typically ferrosilicon containing silicon 72. Carbon, sulfur and phosphorus are moderate.

 

3. Ferrosilicon 65. Ferrosilicon containing silicon 65. The carbon, sulfur and phosphorus contents are relatively high.

 

Among the various grades of ferrosilicon, the most widely used is 75% ferrosilicon. In the steelmaking industry, about 3-5 kg of 75% ferrosilicon is consumed for every 1 t of steel produced.

 

Effect of carbon on ferrosilicon

 

Ferrosilicon contains a fixed amount of carbon. Too low carbon will affect the quality of steel during smelting.

 

One of the raw materials used to produce ferrosilicon is called coke. It serves as a reducing agent in the process of making ferrosilicon.

 

When the temperature reached 1187 ° C, the coke began to dissolve. The higher the silicon content in the ferrosilicon, the lower the carbon content.

 

When the silicon content in the ferrosilicon is more than about 30%, most of the carbon in the ferrosilicon exists in a silicon carbide (SiC) state. Silicon carbide is easily reduced by oxidation of silicon dioxide or silicon monoxide.

 

Silicon carbide has a low solubility in ferrosilicon. Especially when the temperature is low. The silicon carbide remaining in the ferrosilicon is very low. Therefore, ferrosilicon has a very low carbon content. (wanhua)

 

 

Copyright © 2013 Ferro-Alloys.Com. All Rights Reserved. Without permission, any unit and individual shall not copy or reprint!

• [Editor:kangmingfei]